We are currently hiring for all levels of welders. Depending on your experience, knowledge, and ability to pass the in-house testing, will determine what level you will be hired in at.
Level 1 Welder
· Must be completely able to weld GMAW in the carbon discipline.
· Place parts in fixture and weld.
· Properly clean-up welds.
· Welds spare parts in various directions: flat, horizontal, vertical, or overhead, etc.
· Ignite flame or strike an arc Clamp, hold, tack-weld, heat-bend, bolt, or grind part as necessary to satisfy the technical requirements and create a welded final quality and precision part.
· Operate other equipment and perform tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs.
· Able to control the processes of fitting, burning, and welding to avoid problems in relation to overheating, distortion, expansion or shrinking of parts.
· Inspect finished products and parts by comparing them with drawings/blueprints and/ or samples to verify that customers’ specifications are met. Document inspections by completing production work order.
· Prepare and set up necessary tools and equipment for welding job such as shielded metal arc, gas metal arc or other welding equipment.
· Verify and arrange the parts and /or welded parts to be assembled before starting the assembly process. Document and notify Quality of any discrepancies and /or nonconformance.
· Accurately document work on the production work order and note any changes and /or recommendations that are needed for future runs.
· Consistently and accurately clock in and out, record total quantity, and scrap of production work orders using the MieTrak kiosk.
· Complete Welding Kanban as assigned.
Level 2 Welder
· Must competently be able to weld GMAW in the carbon discipline.
· Place parts in fixture and weld.
· Properly clean-up welds.
· Must competently be able to weld GMAW in carbon, stainless, and aluminum.
· Create simple weld fixtures.
· Understand settings on welding machine.
· MUST be able to read a tape measure.
· Welds spare parts in various directions: flat, horizontal, vertical, or overhead, etc.
· Ignite flame or strike an arc Clamp, hold, tack-weld, heat-bend, bolt, or grind part as necessary to satisfy the technical requirements and create a welded final quality and precision part.
· Operate other equipment and perform tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs.
· Able to control the processes of fitting, burning, and welding to avoid problems in relation to overheating, distortion, expansion or shrinking of parts.
· Inspect finished products and parts by comparing them with drawings/blueprints and/ or samples to verify that customers’ specifications are met. Document inspections by completing production work order.
· Prepare and set up necessary tools and equipment for welding job such as shielded metal arc, gas metal arc or other welding equipment.
· Verify and arrange the parts and /or welded parts to be assembled before starting the assembly process. Document and notify Quality of any discrepancies and /or nonconformance.
· Accurately document work on the production work order and note any changes and /or recommendations that are needed for future runs.
· Consistently and accurately clock in and out, record total quantity, and scrap of production work orders using the MieTrak kiosk.
· Complete Welding Kanban as assigned.
Level 3 Welder
· Must competently be able to weld GMAW in the carbon discipline.
· Place parts in fixture and weld.
· Properly clean-up welds.
· Must competently be able to weld GMAW in carbon, stainless, and aluminum.
· Understand settings on welding machine.
· MUST be able to read a tape measure.
· Must competently be able to weld GMAW and GTAW in carbon, stainless, and aluminum.
· Create welding fixtures.
· Ability to use and understand calipers.
· Welds spare parts in various directions: flat, horizontal, vertical, or overhead, etc.
· Ignite flame or strike an arc Clamp, hold, tack-weld, heat-bend, bolt, or grind part as necessary to satisfy the technical requirements and create a welded final quality and precision part.
· Operate other equipment and perform tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs.
· Able to control the processes of fitting, burning, and welding to avoid problems in relation to overheating, distortion, expansion or shrinking of parts.
· Inspect finished products and parts by comparing them with drawings/blueprints and/ or samples to verify that customers’ specifications are met. Document inspections by completing production work order.
· Prepare and set up necessary tools and equipment for welding job such as shielded metal arc, gas metal arc or other welding equipment.
· Verify and arrange the parts and /or welded parts to be assembled before starting the assembly process. Document and notify Quality of any discrepancies and /or nonconformance.
· Accurately document work on the production work order and note any changes and /or recommendations that are needed for future runs.
· Consistently and accurately clock in and out, record total quantity, and scrap of production work orders using the MieTrak kiosk.
· Complete Welding Kanban as assigned.